Anti sanding wall isolation and sealing agent reinforcement agent interface agent is a building material specially used for treating walls, with strong sealing and reinforcement properties, which can effectively prevent wall sanding, improve the service life and aesthetics of the wall. The following will introduce the usage method of anti sanding wall isolation sealing agent, reinforcement agent, and interface agent.

1. Preparation work

Before using anti sanding wall isolation sealing agent, reinforcing agent, and interface agent, it is necessary to clean the floating dust and dirt on the wall surface to ensure that it is dry, flat, and free of oil stains. At the same time, prepare construction tools and protective equipment such as gloves, masks, etc.

2. Apply interface agent

Before applying the interface agent, shake it evenly and then use a roller or brush to evenly apply the interface agent to the wall. When painting, the following points should be noted:

*Brush evenly without any omissions or accumulation.

*The thickness of the coating should be moderate, generally between 1-2mm.

*After painting, it is necessary to wait for a period of time to allow the interface agent to fully dry.

3. Reinforcement treatment

After applying the interface agent, reinforcement treatment is required. The use of anti sanding wall isolation sealing agent, reinforcement agent, and interface agent can effectively improve the hardness and crack resistance of the wall by applying the reinforcement agent to the wall surface. When applying reinforcement agent, the following points should be noted:

*Brush evenly without any omissions or accumulation.

*The thickness of the coating should be moderate, generally between 1-2mm.

*After painting, it is necessary to wait for a period of time for the reinforcing agent to fully dry.

4. Other precautions

When using anti sanding wall isolation sealing agent, reinforcing agent, and interface agent, the following points should be noted:

*During the construction process, good ventilation should be maintained to avoid inhaling harmful gases.

*Do not mix the anti sanding wall isolation sealing agent, reinforcement agent, interface agent with other materials for use.

*Before use, it is necessary to carefully read the instructions and follow the requirements stated in the manual for construction.

*Pay attention to safety during use and avoid contact with eyes or skin.